Kitchen Single-lever sink mixer with stainless steel spring and 2 jets shower - 48cm highID Nr. VZTC012000
All shipments with tracking service
If we do not reply immediately, just leave the message in the Chat box. We reply always!
We care of your privacy and protect your data following severe security schemes
Energy Saving Products and Policy
Art nr.: VZTC012000
Kitchen Single-lever sink mixer with stainless steel spring and 2 jets shower - low version 48 cm
360° swivel spout.
25mm ceramic cartridge
Movable chromed spring spout.
Handshower with 2 jets : single jet and shower jet.
UBA EN ISO standard lead reduced brass.
Neoperl anti limescale & water saving aerator.
45cm flexible tubes with female 3/8" gasket-nut, DVGW KTW A certified.
Kit SOLID FIX SYSTEM - a stainless steal disc and brass screw with two fixing screws on it to fix the tap simply with a screw-driver. The fixing base fit in a 33mm cylinder which gives a diametral firm hold on the sink.
Thick chrome plating for abrasion resistance to everyday use.
All our products are made to respect the new norm and law in Europe (2013) to reduce lead (PB-plombium) and heavy poison metals in a minimum level. We respect European Standards: EN 246, EN 200, EN 248, EN 817, EN 3448 and EN 50930/6.
2 YEARS warranty.
10 YEARS of spare parts availability.
25mm ceramic disc cartridge with flow limitation function.Our cartridge limits the water flow to 10L per minute that is enough for home use in the kitchen, allowing you to save money and help protect the environment!
We design all of our taps with 2 teflon guide rings which protect the 2 sealing o-rings. We could reduce usage and deterioration of o-rings by nearly 80% and we could eliminate 100% wiggling of the spout.
Solid brass and well-built shower. The shower has 2 jets functions: shower effect for easy food and dishes washing and the aerator function which gives a soft and homogeneous jet
The shower is blocked on a suspended stand to prevent it from escaping accidentally and damaging dishes and / or glasses in the sink. We also avodied plastic inserts, ugly to look at. We preferred to work metal on metal that is always clean and beautiful to see!
To give a solid and stable position to our taps, we use our SOLID FIX SYSTEM which has a stainless steal disc and brass screw with two fixing screws on it to fix the tap simply with a screw-driver. The fixing base in a 33mm cylinder which gives a diametral firm hold on the sink.
Our flexible tubes are already equipped with a seal to make your work easier and to guarantee a solid and perfect attachement. DVGW KTW A1 certified.
Nr. 2 Flexible tubes: 1 red and 1 blue with 3/8"gasket-nut (DVGW KTW A certified)
Nr. 1 Kitchen tap
Nr.1 Fixing set
Nr. 1 Warranty and assembly instructions
16 other products in the same category:
- IN PRODUCTION
- No related products at this time.