Kitchen single-lever sink mixer with extractable shower and high swivel spoutID Nr. VZSM010500
If we do not reply immediately, just leave the message in the Chat box. We reply always!
All shipments with tracking service
We care of your privacy and protect your data following severe security schemes
Energy Saving Products and Policy
Art nr.: VZSM010500
Kitchen single-lever sink mixer with high swivel spout with pull-out shower
140° swivel spout.
35mm ceramic cartridge with burning prevention system - TEMPERATURE LOCK.
UBA EN ISO standard lead reduced brass.
Neoperl anti limescale & water saving aerator.
With pull-out shower.
120cm long solid nylon shower hose.
45cm flexible tubes with female 3/8" gasket-nut, DVGW KTW A certified.
Kit SOLID FIX SYSTEM - a stainless steal disc and brass screw with two fixing screws on it to fix the tap simply with a screw-driver. The fixing base fit in a 33mm cylinder which gives a diametral firm hold on the sink.
Thick chrome plating for abrasion resistance to everyday use.
All our products are made to respect the new norm and law in Europe (2013) to reduce lead (PB-plombium) and heavy poison metals in a minimum level. We respect European Standards: EN 246, EN 200, EN 248, EN 817, EN 3448 and EN 50930/6.
2 YEARS warranty.
10 YEARS of spare parts availability.
Shower made of lightweight thermoplastic material to prevent accidentally falling. It does not break your dishes! The thermoplastic shower does not transmit the heat of hot water by leaving it always pleasantly cool to the touch of the hand! Flexible and ultra-thin nylon. It slides much better than a metal hose so it can not jam either or even worse, it breaks.
We design all of our taps with 2 teflon guide rings which protect the 2 sealing o-rings. We could reduce usage and deterioration of o-rings by nearly 80% and we could eliminate 100% wiggling of the spout.
To give a solid and stable position to our taps, we use our SOLID FIX SYSTEM which has a stainless steal disc and brass screw with two fixing screws on it to fix the tap simply with a screw-driver. The fixing base in a 33mm cylinder which gives a diametral firm hold on the sink.
Our flexible tubes are already equipped with a seal to make your work easier and to guarantee a solid and perfect attachement. DVGW KTW A1 certified.
To avoid small children, old people and people with disability burning hands when they inadvertently open the tap in hot water, we have added a limiting device ( which can be adjusted by user according to need) to our faucets. By simply fixing the liming device to the position where water is not too hot, water cannot open more then the prefixed blockade. Even if your child is alone, there is no danger. Safety is our priority!
Nr. 2 Flexible tubes: 1 red and 1 blue with 3/8"gasket-nut (DVGW KTW A certified)
Nr. 1 Kitchen tap
Nr.1 Fixing set
Nr. 1 Warranty and assembly instructions
16 other products in the same category:
- No related products at this time.